E-Surrey Kit (No Batteries)
Electric Surrey conversion kit.Note: This is not plug and play. It will require connecting wires and batteries and also removing (cuting) the piece of bike fram that holds the brake hub in place. We are here to help guide you through installation, but if you are not handy, we do not reccomend you try to install yourself The ekit will fit on all of our Beach Surrey Bikes for double or single bench. It should fit on other manufacturer's bikes but we cannot garantee it.Kit comes with a full rear driver side wheel with motor already installed - you will remove your current wheel and brake and attach the new wheel with motor and brake (requires a piece of frame to be cut off to fit) This kit does not includeds batteries or box for housing, or charger. Batteries will need to be connected in series and attached to controller proving 60 volts, 32amp hours. Kit comes with wires and connections, box to house the wiriing, controller, Digital display and controller, and pedal sensor (requires removing driver side crank to install).Please contact us prior to ordering if you have any questions and review the installation guide under our info page. Motor is 60v 1500watt with 60v 32Ah lead acid battery. has a digital LCD display to show your speed, distance, battery level and what gear you are in. 5 gears controlled by the display/controller. LED headlights are also powered by the battery.Max range is about 40 miles but can vary based on rider weights, inclines and average speed.Charging time is 8-10 hours.Top speed is about 13mphThere is a cadence sensor on the driver side pedal. This is as safety feature to ensure you are still on the bike and prevents the bike from 'ghost riding'Not intended to assist with hill climbs. This can burn out the motor.